Mast Gooseneck fitting for Feeling 1040
- Roger Gabriel
-
Auteur du sujet
- Messages : 1
Mast Gooseneck fitting for Feeling 1040
11 Oct 2016 21:03
Where can I get a replacement Mast fitting for the gooseneck joint to boom? The makers name is missing / worn off. There are 6 pop rivets to drill out then it sides up out the track to remove.
On checking there is a lot of wear - this is well worth checking as if it fails the results would be very costly - see picture of wear.
On checking there is a lot of wear - this is well worth checking as if it fails the results would be very costly - see picture of wear.
Connexion ou Créer un compte pour participer à la conversation.
- GERARD
-
- Messages : 1071
Re: Mast Gooseneck fitting for Feeling 1040
11 Oct 2016 21:59
Hello Roger,
the mast was from Isomat, which have been acquired few years ago by SparCraft, a french company.
www.sparcraft.com/
You can join them on: +33 5 4645 9045 or by mail: contact@sparcraft.com
The mast model, at least on my Feeling 1090, was a Isomat Ocean Range NG51.
If it is your mast as well, the reference for the complete gooseneck is: 3451177OC25 (to be double checked with SparCraft of course).
Good luck for the ordering, and let me know how it goes.
the mast was from Isomat, which have been acquired few years ago by SparCraft, a french company.
www.sparcraft.com/
You can join them on: +33 5 4645 9045 or by mail: contact@sparcraft.com
The mast model, at least on my Feeling 1090, was a Isomat Ocean Range NG51.
If it is your mast as well, the reference for the complete gooseneck is: 3451177OC25 (to be double checked with SparCraft of course).
Good luck for the ordering, and let me know how it goes.
Connexion ou Créer un compte pour participer à la conversation.
Modérateurs: GERARD